Difference between revisions of "CCTV"
From Digipool-Wiki
(→IMPORX CCTV) |
|||
Line 12: | Line 12: | ||
<br> | <br> | ||
− | == | + | == Connecting the Cam to a Windows PC == |
− | the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux) | + | * the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux) |
− | connect cam directly via ethernet cable with pc, no internet needed | + | * connect cam directly via ethernet cable with pc, no internet needed |
− | set your IP v4 address to 192.168.0.10 (gateway doesnt matter, set it to 192.168.0.1 ) | + | * set your IP v4 address to '''192.168.0.10''' (gateway doesnt matter, set it to 192.168.0.1 ) |
− | open | + | * open Internet Explorer and connect to the cam by typing the following IP in the address bar: '''192.168.0.99''' |
− | the cam webinterface should appear, login: admin password: admin | + | * the cam webinterface should appear, login: '''admin''' password: '''admin''' |
− | to activate the video | + | * to activate the video you need to install a custom Internet Explorer plugin. |
− | it will download from the cam (not internet) save to disk, install, restart browser (or refresh page) | + | ** Click 'download plugin' in center of interface (where video is supposed to be) |
− | video of the cam should be on now (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software) | + | ** it will download from the cam (not internet) save to disk, install, restart browser (or refresh page) |
− | + | ** video of the cam should be on now | |
− | + | ** (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software) | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | <br> | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | == Set the Cam to constantly Auto-Tracking == | |
+ | |||
+ | * go to the tracking tab (top right corner, little walking man) | ||
+ | * use the arrow controls to make the cam point to the room | ||
+ | ** (which would be straight down, if it hung vertically from a building) | ||
+ | * enable zoom, set to 8 or 10 | ||
+ | * return 5 seconds | ||
+ | * save scene | ||
+ | * enable tracking, 'on' | ||
+ | * the cam should be auto track movement now, test it. | ||
+ | * to avoid the cam going into parking position doing nothing we need to go into system settings | ||
+ | ** go to the first tab in right panel, and save the current setting to scene 1 | ||
+ | ** then go to left hand panel "system settings" | ||
+ | ** select 'PTZ' tab | ||
+ | ** set return to parking to 5 min | ||
+ | ** change 'do nothing' to 'call scene 1' | ||
+ | |||
+ | <br> |
Revision as of 08:37, 15 February 2021
IMPORX CCTV
- Auto Tracking PTZ IP Kamera
- Blue Iris Unterstützung
- 1080P Full HD
- 20X Optische Zoom
- Kamera ONVIF High Speed
- Wetterfeste mit Heizlüfter und Wischer
- 400ft IR Distanz
Connecting the Cam to a Windows PC
- the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux)
- connect cam directly via ethernet cable with pc, no internet needed
- set your IP v4 address to 192.168.0.10 (gateway doesnt matter, set it to 192.168.0.1 )
- open Internet Explorer and connect to the cam by typing the following IP in the address bar: 192.168.0.99
- the cam webinterface should appear, login: admin password: admin
- to activate the video you need to install a custom Internet Explorer plugin.
- Click 'download plugin' in center of interface (where video is supposed to be)
- it will download from the cam (not internet) save to disk, install, restart browser (or refresh page)
- video of the cam should be on now
- (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software)
Set the Cam to constantly Auto-Tracking
- go to the tracking tab (top right corner, little walking man)
- use the arrow controls to make the cam point to the room
- (which would be straight down, if it hung vertically from a building)
- enable zoom, set to 8 or 10
- return 5 seconds
- save scene
- enable tracking, 'on'
- the cam should be auto track movement now, test it.
- to avoid the cam going into parking position doing nothing we need to go into system settings
- go to the first tab in right panel, and save the current setting to scene 1
- then go to left hand panel "system settings"
- select 'PTZ' tab
- set return to parking to 5 min
- change 'do nothing' to 'call scene 1'