Difference between revisions of "CCTV"
From Digipool-Wiki
(→IMPORX CCTV) |
|||
(4 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
== IMPORX CCTV == | == IMPORX CCTV == | ||
− | [[File:CCTV-Cam-Kassel.jpg| | + | [[File:CCTV-Cam-Kassel.jpg|300px]] |
* Auto Tracking PTZ IP Kamera | * Auto Tracking PTZ IP Kamera | ||
Line 9: | Line 9: | ||
* Wetterfeste mit Heizlüfter und Wischer | * Wetterfeste mit Heizlüfter und Wischer | ||
* Infrarotlicht-Distanz: 120 m | * Infrarotlicht-Distanz: 120 m | ||
− | * Blue Iris Unterstützung | + | * Mit [https://en.wikipedia.org/wiki/ONVIF ONVIF] und [https://blueirissoftware.com/ Blue Iris] Unterstützung |
− | + | ||
<br> | <br> | ||
Line 16: | Line 15: | ||
== Connecting the Cam to a Windows PC == | == Connecting the Cam to a Windows PC == | ||
− | * the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux) | + | * the cam webinterface '''only''' works with '''Windows Internet Explorer''' (not edge, no mac, no linux) |
* connect cam directly via ethernet cable with pc, no internet needed | * connect cam directly via ethernet cable with pc, no internet needed | ||
* set your IP v4 address to '''192.168.0.10''' (gateway doesnt matter, set it to 192.168.0.1 ) | * set your IP v4 address to '''192.168.0.10''' (gateway doesnt matter, set it to 192.168.0.1 ) |
Latest revision as of 09:16, 15 February 2021
IMPORX CCTV
- Auto Tracking PTZ IP Kamera
- 1080P Full HD
- 20X Optische Zoom
- Wetterfeste mit Heizlüfter und Wischer
- Infrarotlicht-Distanz: 120 m
- Mit ONVIF und Blue Iris Unterstützung
Connecting the Cam to a Windows PC
- the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux)
- connect cam directly via ethernet cable with pc, no internet needed
- set your IP v4 address to 192.168.0.10 (gateway doesnt matter, set it to 192.168.0.1 )
- open Internet Explorer and connect to the cam by typing the following IP in the address bar: 192.168.0.99
- the cam webinterface should appear, login: admin password: admin
- to activate the video you need to install a custom Internet Explorer plugin.
- Click 'download plugin' in center of interface (where video is supposed to be)
- it will download from the cam (not internet) save to disk, install, restart browser (or refresh page)
- video of the cam should be on now
- (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software)
Set the Cam to constantly Auto-Tracking
- go to the tracking tab (top right corner, little walking man)
- use the arrow controls to make the cam point to the room
- (which would be straight down, if it hung vertically from a building)
- enable zoom, set to 8 or 10
- return 5 seconds
- save scene
- enable tracking, 'on'
- the cam should be auto track movement now, test it.
- to avoid the cam going into parking position doing nothing we need to go into system settings
- go to the first tab in right panel, and save the current setting to scene 1
- then go to left hand panel "system settings"
- select 'PTZ' tab
- set return to parking to 5 min
- change 'do nothing' to 'call scene 1'